Nortel Networks P0990474 03 manual Running the Quick Install Wizard

Chapter 5 Initializing the CallPilot Mini/CallPilot 150 39

Running the Quick Install Wizard

The Quick Install Wizard appears the first time you startup CallPilot Manager. The Quick Install Wizard is a single page that gathers enough information to set up a working system. It then applies the information and restarts the system.

You can reach CallPilot Manager from another computer through a LAN connection, WAN/ Internet connection or an Ethernet crossover cable. All of these methods create an IP connection that allows you to run CallPilot Manager.

Use the following procedure to run the Quick Install Wizard:

1Launch your browser.

2In the URL address box, type the CallPilot Mini/CallPilot 150 IP address. For example: HTTP://192.168.110.10

Note: You must include HTTP:// to access CallPilot Manager.

The Quick Install Wizard screen appears. Depending on your system, this can take several minutes to appear.

3Configure the Quick Install parameters for a CallPilot Mini according to Table 13 on page 39. Configure the Quick Install parameters for a CallPilot 150 according to Table 14 on page 41.

Table 13 Quick Install Wizard parameters for a CallPilot Mini

Field name	Description
IP Address	Enter the IP Address for the CallPilot Mini. If you do not know the IP Address, contact
	your network administrator.
	This is the IP Address you will use to access the CallPilot Mini using CallPilot Manager.
	Changes to the IP Address take effect when you reboot the CallPilot Mini.
	If this is a re-install, the IP Address shows the current settings, not the factory default.
Subnet Mask	Enter the Subnet Mask for the CallPilot Mini. If you do not know the Subnet Mask,
	contact your network administrator.
	Changes to the Subnet Mask take effect when you reboot the CallPilot Mini.
	If this is a re-install, the Subnet Mask shows the current settings, not the factory default.
Primary DNS	Enter the IP Address of the Primary DNS server that CallPilot Mini uses. If you do not
	know the IP Address, contact your network administrator.
	The Primary DNS server allows you to use domain names, such as
	www.nortelnetworks.com, instead of IP addresses when accessing a site.
	Note: If you do not use DNS, leave this box blank. CallPilot applications, such as Digital
	Networking, can use a DNS server even if you leave this box blank.
Secondary DNS	Enter the IP Address of the Secondary DNS server that CallPilot Mini uses. If you do not
	know the IP Address, contact your network administrator.
	CallPilot Mini uses the Secondary DNS server if it cannot contact the Primary DNS
	server or if the domain name is not listed in the Primary DNS server.
	Note: If you do not use DNS, leave this box blank. CallPilot applications, such as Digital
	Networking, can use a DNS server even if you leave this box blank.

CallPilot Mini/CallPilot 150 Installation and Maintenance Guide