Nortel Networks P0990474 03 manual Select the Advanced custom settings option

76Modem Access

Configuring the Dial-Up Networking TCP/IP parameters on Windows 2000

1Right click on the Dial-Up Networking connection you created for CallPilot and then click Properties.

2Click the Configure button.

3Select the Enable hardware flow control option.

4Clear the following options:

Enable modem error control Enable modem compression Show Terminal window Run script options

5Click the OK button.

6Click the Security tab.

7Select the Advanced (custom settings) option.

8Click the Settings button.

9Select the Allow these protocols option.

10Select the Unencrypted password (PAP) option and clear the other options.

11Click the OK button.

12Click the Networking tab.

13In the Type of dial-up server I am calling drop list, click PPP:Windows 95/98/NT4/2000, Internet.

14Click the Settings button.

15Select the following options:

Enable LCP extensions Enable software compression

Negotiate multi-link for single link connections

16Click the OK button.

17Select the Internet Protocol (TCP/IP) option.

18Click the Internet Protocol (TCP/IP) heading and then click the Properties button.

19Select the Use the following IP address option.

20Enter the IP address of CallPilot system, but change the last set of digits to a different number. For example, if the CallPilot IP address is 192.168.0.1, enter 192.168.0.10.

Note: The IP address you enter here is used to identify your computer during the modem connection. It does not affect the LAN configuration of your computer.

21Click the OK button.

22Click the OK button.

P0990474 03