59

Chapter 9

Upgrading CallPilot Mini/CallPilot 150

This section describes how to upgrade the CallPilot Mini/CallPilot 150. You can upgrade:

the CallPilot software

the message storage

Upgrading the CallPilot software version

Make sure that there is no one using the CallPilot Mini/CallPilot 150 before you start the upgrade. For information about how to determine if the CallPilot ports are busy, refer to “Programming CallPilot 150 DNs to memory buttons” on page 84.

1Nortel Networks recommends that you backup your CallPilot information before you upgrade the CallPilot software. For information about how to backup CallPilot, refer to “Backing up the CallPilot information” on page 53.

2Put on an anti-static strap and connect it to a grounded metal object.

3Unplug the power connector from the CallPilot Mini/CallPilot 150.

4Insert the upgrade cartridge in the top PCMCIA slot.

For the location of the PCMCIA slots, refer to Figure 1 on page 19.

Caution: The upgrade cartridge must be inserted in the top PCMCIA slot.

If the upgrade cartridge is inserted in the bottom PCMCIA slot, your current software overwrites the upgrade cartridge and all of your programming is lost. Contact your Nortel Networks Service Representative for assistance.

Caution: Never install the upgrade cartridge or the feature cartridge in any device other than the CallPilot Mini/CallPilot 150. These cartridges can be corrupted by inserting them in other devices.

5Restore power to the unit.

The CallPilot Mini/CallPilot 150 starts up. During the start up, the LEDs turn on and off in the following sequence:

LEDs 1 to 4 light for approximately 20 seconds

LEDs 1 to 4 turn off for approximately 25 seconds

6The CallPilot Mini/CallPilot 150 copies the files from the upgrade cartridge to the feature cartridge. During the upgrade, the LEDs turn on and off in the following sequence:

LEDs 1 to 4 cycle on and off, one at a time, for approximately 8 to 10 minutes

LEDs 1 to 4 turn off for approximately 40 seconds

some or all of the LEDs 1 to 4 may light to indicate TCM connections to the CallPilot on these ports

CallPilot Mini/CallPilot 150 Installation and Maintenance Guide

Page 59
Image 59
Nortel Networks P0990474 03 manual Chapter Upgrading CallPilot Mini/CallPilot, Upgrading the CallPilot software version

P0990474 03 specifications

Nortel Networks P0990474 03 is a significant component in the realm of telecommunications, particularly in the area of networking solutions. This device is recognized for its robust engineering, which caters to a wide range of networking needs. As part of Nortel's extensive portfolio, it showcases the company's dedication to providing high-quality technology that meets the evolving demands of businesses.

One of the primary features of the P0990474 03 is its ability to support various networking topologies. This flexibility allows organizations to seamlessly integrate the device into their existing infrastructure, ensuring that they can effectively manage data flow and connectivity. The device is designed to enhance performance and reliability, which are critical factors in today's fast-paced digital environment.

In terms of technologies, the Nortel Networks P0990474 03 employs advanced switching capabilities that optimize bandwidth usage. By efficiently directing traffic within the network, it minimizes latency and maximizes performance, which is essential for applications that require real-time data access. Additionally, the device supports a variety of protocols, enabling interoperability with other networking equipment, which is vital for heterogeneous network environments.

One of the outstanding characteristics of the P0990474 03 is its scalability. Businesses can start with a basic setup and expand their systems as their needs grow. This scalability not only supports immediate requirements but also prepares organizations for future growth without necessitating a complete overhaul of their existing network architecture.

Furthermore, the P0990474 03 integrates security features designed to protect sensitive data from potential threats. With the increasing prevalence of cyber-attacks, having robust security measures is paramount for any organization. This device employs encryption, firewalls, and other security protocols to ensure that data remains protected while in transit.

Finally, the Nortel Networks P0990474 03 is recognized for its user-friendly interface, which simplifies the management and configuration processes for network administrators. With easier monitoring tools and reporting functionalities, managing extensive networks becomes less of a challenge, allowing IT teams to focus on strategic initiatives rather than day-to-day operational tasks.

In conclusion, the Nortel Networks P0990474 03 is a versatile, scalable, and secure networking device that stands out in the telecommunications landscape. Its ability to adapt to various network environments while delivering top-notch performance and reliability makes it an invaluable asset for businesses looking to enhance their networking capabilities.