Whirlpool 930 warranty Using Cancel/Drain, Selecting cycle options

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or to clear the indicators.

To cancel a cycle:

l Press Cancel/Drain while the dishwasher is running to start a 2-minute drain. It will take a few seconds for the drain to start. If desired, select a new cycle. (See the “Changing a cycle or option setting” section.)

l You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher again before starting a new cycle.

NOTE: A small amount of water remaining in the dishwasher is normal.

To clear the indicators:

Press Cancel/Drain before starting the dishwasher to clear all cycle and option selections.

Selecting cycle options

You can press an Option pad after the dishwasher starts as long as the cycle is not past the point that the option is used. For example, you can press Air Dry anytime before the Drying indicator glows.

After a wash cycle, the dishwasher remembers the chosen options and uses the same options in the next wash cycle unless new options are selected or the Cancel/ Drain pad is pressed.

High Temp Wash

When Hi<jh Temp Wash is selected, the dishwasher heats the water during the main wash of the Low Energy/China and Normal cycles. Heating the water helps improve washing results. The Pots-N-Pans

cycle automatically uses High Temp Wash.

Air Dry

When Air Dry is selected, the air in the dishwasher is not heated during the “dry”portion of a cycle.

. ,. Using Air Dry helps save energy, but dishes take longer to

Mdry and some spotting can occur. Some items (such as plastics) may need towel drying. For best drying, use a liquid rinse agent.

NOTE: The dishwasher automatically heats the air in the dishwasher during the “dry”portion of the cycle unless you select Air Dry.

14