5.Push door firmly closed. The door latches automatically. Run hot water at the sink where you will connect dishwasher until water is hot. (See “Dishwasher Efficiency Tips.”) Turn off the water and hook the dishwasher to the faucet. (See “Connecting Your Dishwasher.”) Turn on the hot water.
6.Press the desired cycle and option selections. (See “Dishwasher Use.”)
Preparing the faucet
1.Remove the screen holder or aerator, screen, and washer from the end of the faucet.
2.Use the faucet adapter kit that came with your portable dishwasher to modify the faucet where the dishwasher will be used.
1.Washer
2.Screen
3.Screen holder or aerator
NOTE: Remove and save the washer, screen, and screen holder or aerator for future use.
Stopping Your Dishwasher
You can stop your dishwasher anytime during a cycle.
1.Open the door slightly.
2.Wait for the spraying action to stop. Then open the door all the way, if needed.
Close the door to continue the cycle.
OR
Press CANCEL/DRAIN. A
Connecting the faucet adapter to faucets with external threads
Insert the two screens and then the thin washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.
CONNECTING YOUR
PORTABLE DISHWASHER
Connecting the Faucet Adapter
NOTE: A special adapter must be installed on the faucet before the dishwasher can be connected. Complete Installation Instructions and the adapter are packed with your dishwasher. (See the Installation Instructions.)
When moving your dishwasher, make sure the door is latched. Hold the dishwasher at the top front corners.
1.Thin washer
2.Screens
3.Faucet adapter
NOTE: Do not use the thick washer.
Connecting the faucet adapter to faucets with internal threads
Insert the 2 screens, the thin washer, and then the thick washer from the faucet adapter kit into the faucet adapter. Attach the adapter onto the end of the faucet.
1.Thick washer
2.Thin washer
3.Screens
4.Faucet adapter
NOTE: Use both washers.
8
