Whirlpool ACD052PK0 installation instructions Installation

Installation

short

screws

short

screws

1. Insert guide panels into air conditioner guides.

2. Attach curtains to air conditioner with short screws.

seal strip

3. Cut adhesive-backed seal strip to window width. Remove backing from seal strip. Attach seal strip to bottom of window.

Note: Maintain a firm hold on air conditioner to prevent it from falling out of the opening during installation.

inner sill

room side

centerline

4. Open window and mark centerline of inner sill.

inner sill	short	INSIDE
	screw
outer sill		centerline

8" (20.3 cm)

!WARNING

Excessive Weight Hazard

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

6. Carefully lift air conditioner and slide it into open window. Make sure bottom guide of air conditioner drops into L bracket. Be sure that air conditioner is centered in window from right to left.

window frame	seal
upper guide
	about
	1/4"
bottom guide	(6.3 mm)

Lbracket

7.Lower window sash down behind upper guide of air conditioner. Make sure the air conditioner tilts to the back as shown.

L bracket

short

screw

sash seal

wood screw

OUTSIDE

8" (20.3 cm)

8. Extend guide panels to fill window opening. Use 4

Lbracket

5.Attach one L bracket 8 inches (20.3 cm) from either side of centerline, flush against back of inner window sill, with short side of bracket in vertical position. Brackets will help hold air conditioner in place. Use 2 short screws.

wood screws.

9. Insert sash seal behind top of lower window sash and against glass of upper window.

10. Fasten L bracket using a short screw.

11