Cleaning the slide-out
The filter is cleanable. A clean filter helps remove dust, lint, and other particles from the air. Check every two weeks to see if filter needs cleaning.
1.Remove filter by sliding it up and out the top of the front panel.
2.Clean filter using a vacuum cleaner.
OR
If very dirty, wash filter with warm water and mild detergent. Air dry thoroughly before replacing.
3.Replace filter by sliding it back down into opening at top of front panel.
air filter
Filter
I” | ’ | I |
Performing annual maintenance
Your air conditioner needs annual mainte- nance to ensure steady, top performance throughout the year. Call the service com- pany recommended by your dealer to:
l Inspect and clean the coils and condensate water passages.
l Check fan and fan motor.
The compressor and fan motor are sealed and need no oiling. The expense of an annual inspection is the consumer’s respon- sibility.
OR
If you are familiar with electrical appliances, you can do the inspection and maintenance yourself. If you choose to do so, follow these steps:
1.Disconnect power cord from receptacle.
2.Remove the front panel. (See “Cleaning the front panel” on page 7.)
3.Slide unit out of cabinet using the handles on the base flange
4.Be careful not to break off or remove white or gray beaded foam parts. Some are marked “Donot remove.”
Electrical Shock Hazard
l Unplug power cord from receptacle before performing any maintenance. Be sure no liquid gets into the motor, electrical control box, or compressor electrical terminals.
l Do not lift, push, or pull any white or gray beaded foam (expanded polysty- rene) parts.
l Because your air conditioner weighs from 80 to 200 pounds, it is recom- mended that you have someone help you when you remove or reinstall your unit and that you both use proper lifting techniques.
l Handle the air conditioner with care. Watch out for the sharp metal fins on the front and rear coils.
l Do not use the collected water for drinking purposes. It is not sanitary.
Failure to follow the above precautions could result in electrical shock, personal injury, or product damage.
8
