Troubleshooting

Listed in the chart below are the most common problems consumers run into with their air conditioners. Please read through this chart before calling for service. It could save you the cost of a service call.

r PROBLEM

CHECK THE FOLLOWING

 

 

Air conditioner

Is the unit plugged

into

a live circuit with

proper

voltage?

won’t run

Has the time-delay

fuse

blown or circuit

breaker

tripped?

 

Is the Fan Control set to OFF?

Is the Thermostat Control set correctly?

Unit blows fuses or trips circuit breaker

Unit turns on and off

OR does not cool/heat the room

Has the local power failed?

Are time-delay fuses being used?

Is an extension cord being used? DO NOT use an extension cord with this or any other appliance.

Are you waiting 3 minutes before trying to restart the unit?

Is the air filter clean?

Are the inside evaporator coils and the outside condenser coils clean?

Is there excessive moisture or heat in the room (open vessel cooking, showers, etc.)?

Is the Fan Control set too low?

Is the Thermostat Control set properly?

Normal operating sounds

When your air conditioner operates nor- mally, you will hear sounds such as:

l

l

PINGING or CLICKING as water droplets hit the condenser. Water droplets help cool the condenser.

AIR MOVEMENT from the fan, especially on QUICK COMFORT setting.

l CLICKS from the cooling cycle.

Sounds may also be caused by house construction - such as vibration of the unit due to wall construction or an unsteady window mounting area.

10

Page 10
Image 10
Whirlpool ACH082XD0 warranty Troubleshooting, Normal operating sounds, Problem, Air conditioner, Won’t run