Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, visit our website for further information (www.uniden.com.au or www.uniden.co.nz).
ADDITIONAL
Symptom
The charge/ in use LED or charge LED won't illuminate when the handset is placed in the cradle.
Interference. The audio sounds weak and/ or scratchy.
Can't make or receive calls.
Suggestion
•Make sure the AC adapter is plugged into the cradle and wall outlet.
•Make sure the handset is properly seated in the cradle.
•Make sure the charging contacts on the handsets are clean.
•Move the handset and/ or main base away from metal objects or appliances and try again.
•Press the delete/channel key (XSA1255) or the select/channel key (XSA1255+1) in the talk mode to help eliminate background noise.
•Make sure that the handset is not too far from the main base.
•Re- register both handsets (see page 12) (XSA1255+1 only).
•Check both ends of the telephone cord.
•Make sure the AC adapter is plugged into the main base and wall outlet.
•Disconnect the AC adapter for a few minutes. Then reconnect it.
•Change the digital security code (see page 50).
•Make sure that the handset is not too far from the main base.
•Check the dialing mode used by your telephone company.
INFORMATION
[54]
