C.Connect the Main Base and Charging Cradle(XSA1255+1 only), and Charge the Handsets
1) Connect each AC adapter to the DCIN 9V jack and to each standard 240V AC wall outlet.
2) Place one handset in the main base and the other in the charging cradle with the keypad facing forward.
3) Make sure the charge/in use LED and charge LED illuminate. If the LED does not illuminate, check
to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts.
• Connect each AC adapter to a continuous power supply.
• Place each cradle close to the AC outlet to avoid long extension cords.
4) Charge your handsets at least
5) Once the handset battery packs are fully charged, connect the telephone cord to the TEL LINE
jack and a telephone outlet. If your telephone outlet isn't modular, contact your telephone
company for assistance.
Australia 
Tel Line adaptor
(not supplied)
[8]
!Use only the supplied AAD- 041S adapter. Do not use any other AC adapter.
!Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard.
