Uniden XSA1255+1 owner manual Install the Rechargeable Battery Packs into the Handsets

Models: XSA1255 XSA1255+1

1 64
Download 64 pages 6.92 Kb
Page 8
Image 8

Use only the Uniden (BT-905 or BT-905s) rechargeable battery pack supplied with your cordless telephone.

B. Install the Rechargeable Battery Packs into the Handsets

Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle.

1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover down ward to remove.

2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment.

(The connector notches fit into the grooves of the only one way.) Match the wire colors to the polarity label in the battery compartment, connect the battery and listen for a click to insure connection.

3)Make sure you have a good connection by slightly pulling on the battery wires. If the connection is

secure, the battery jack will remain in place.

4) Place the battery case cover back in the handset by sliding it upwards until it clicks into place.

Repeat process for second handset (XSA1255+1 only).

[7]

Page 8
Image 8
Uniden XSA1255+1 owner manual Install the Rechargeable Battery Packs into the Handsets