Direct wall mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this,

consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths.

Make sure the wall material is capable of supporting the weight of the main base and handset.

Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall material where the main base will be placed.

3mm

100mm

35mm

GETTING STARTED

1)Insert two mounting screws into the wall, (with their appropriate anchoring device), 100mm apart. Allow about 3mm between the wall and screw heads for mounting the phone.

2)Refer to steps 1 through 7 on page 9 to mount the telephone.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

[10]

Page 11
Image 11
Uniden XSA1255+1 owner manual Direct wall mounting, Installing the Beltclip, To attach the beltclip, To remove the beltclip