!When editing the speed dial memory, you must press a key within 30 seconds or the phone will return to standby mode. If you return the handset to the cradle, the phone will return to standby mode also.
!For New Zealand: Telecom access numbers are pre- programmed into speed dial locations as follows.
!Divert On: SPD1
!Divert Off: SPD2
!Block CID: SPD3
!Messages: SPD4
!Directory: SPD6
Using the Speed Dial Memory
The speed dial memory allows you to store up to 10 names and numbers in each handset. You can dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. For example, you can save your bank account number to speed dial memory. When you call your bank's telephone teller service and are prompted to enter your account number, simply press the memory key and the speed dial number where you stored your account number. Then press the select/remote key (XSA1255)or the select/channel key(XSA1255+1).
Storing Names and Numbers in Speed Dial Memory
1) With the phone in standby mode, press the memory key.
2) Enter 
/vol/
and
/vol/
keys. Press the select/remote key (XSA1255)or the select/channel key(XSA1255+1)twice.
3) Store Name appears and a cursor flashes indicating that the phone is ready for the name to be entered.
If the selected speed dial number is already assigned, the Edit screen appears. You can select Edit to edit this entry, select Delete to erase this entry, or select Go Back to choose another speed dial number.
[23]
