Operating.lnstructions
Starting your air conditioner
Electrical Shock Hazard
l Plug unit only into grounded electrical outlet.
l Do not use an extension cord.
l Do not operate unit with front removed. Failure to follow the above precautions could result in electrical shock or personal injury.
1. Set Exhaust Vent Control to CLOSED for maximum cooling or heating.
2. Set Fan Speed Control to the desired setting. For cooling, use one of the COOL settings. For heating, use one of the HEAT settings.
HI ................_.for maximum cooling or heating MED ...................for normal cooling or heating LO ................................... for sleeping comfort FAN ONLY .................. for circulating room air when no cooling or heating is desired
NOTE: This product is not designed to be used as a primary heat source. It is intended for supplemental heating only. HEAT mode operation is not recommended when the outdoor temperature is below 45°F.
Turn the Thermostat Control to desired setting. You can adjust the air conditioner’s cooling or heating performance by resetting the Thermostat Control toward COLDER for more cooling. Turn toward WARMER for more heating. You will need to experiment to find the setting which suits you best.
NOTE: If you turn your air conditioner off, wait at least 3 minutes before turning it back on or you may blow a fuse or trip a circuit breaker.
3
