. __^_._.
Using the exhaust vent
The Exhaust Vent Control draws stale or smoky air from the room or circulates existing room air.
To exhaust room air:
1.Set Exhaust Control to OPEN.
2.Set Fan Control to desired setting. If no cooling is desired, set Fan Control to
FAN ONLY.
3.Set Thermostat Control to desired setting.
To circulate room air:
1.Set Exhaust Control to CLOSED.
2.Set Fan Control to desired setting. If no cooling is desired, set Fan Control to
FAN ONLY.
3.Set Thermostat Control to desired setting.
NOTE: For maximum performance, the Exhaust Vent Control must be in the CLOSED position when cooling or room air circulation is desired.
control
EXHAUST VENT
1
OPEN CLOSED
I
I EXHAUST VENT
(
OPEN CLOSED
Using the energy saver
Use the Energy Saver settings when you do not want the fan to run continuously. Using these settings causes the fan to stop when the compressor stops, and saves energy. Set the Fan Control to the desired setting. LOW - for sleeping comfort
MED - for normal cooling
QUICK COMFORT - for fastest cooling
Changing air direction
The air direction louvers, in the top grille area of the front panel, control the direction of the cooled air. Move the tabs in the direction you want the air to flow (right, left, or straight ahead). A tab in the center of the louver area (on some models) adjusts the airflow up or down.
set :tings
ENERGYNORMAL
I SAVER FAN
