Whirlpool AC0052, ACQ062 warranty If You Need Assistance Or Service, Before calling for assistance

If You Need Assistance Or Service

This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our Consumer Assistance Center for help or calling for service, please provide a detailed description of the problem, your appliance’s complete model and serial numbers and the purchase or installation date. (See page 2.) This information will help us respond properly to your request.

1. Before calling for assistance .. .

Performance problems often result from little thinqs vou can find and fix without tools of any kind. Please check the chart below for problems you can fix. It-could save you the cost of a service call:

	PROBLEM				POSSIBLE				CAUSE
Air	conditioner			Unit	is not plugged				into	a live
will	not	run		circuit with			proper		voltage.
				The Fan Control is set to OFF.
				The Thermostat Control is not
				set	correctly.
				A household fuse has blown or
				a circuit breaker has tripped.
				The local power has failed.
Unit	blows			A time-delay			fuse		is not	being
household			fuses	used.
or trips		circuit		An extension				cord	is being
breaker				used.
				The unit was just turned off and
				on again.
Unit	turns		on	The	filter	is dirty.
and	off,	or	does	The	coils	(evaporator [inside]
not	cool/heat
				and	condenser			[outside])		are
room
				dirty.
				There is excessive moisture or
				heat in the			room.
				The fan speed setting is too
				low.
				The Thermostat Control is not
				set	correctly.

SOLUTION1

Plug unit into a live circuit with proper voltage.

Set the Fan Control to a setting other than OFF.

Set the Thermostat Control to a setting cooler than the room temperature.

Replace fuse or reset circuit breaker.

Wait for power to be restored.

Replace fuse with a time-delay fuse of the correct capacity.

Do not use an extension cord to run your air conditioner.

Wait three minutes after turning unit off before trying to restart it.

Clean the filter. (See page 8.)

Clean the coils. (See pages 8-9.)

It will take longer for the unit to cool or heat a room when there is excess moisture or heat (open cooking vessel, shower, etc.).

Set Fan Control to a higher setting.

Set the Thermostat Control to a cooler setting.

11