Whirlpool ACU124 OperatingInstructions, Starting your air conditioner, The exhaust vent control

OperatingInstructions

Starting your air conditioner

l

l

l

Electrical Shock Hazard

Plug unit only into grounded electrical outlet.

Do not use an extension cord.

Do not operate unit with front removed.

Failure to follow the above precautions could result in electrical shock or personal injury.

1.Set Exhaust Vent Control to CLOSED for maximum cooling.

2.Set Fan Speed Control to the desired setting.

QUIET COOL		......................... for sleeping	comfort
MED	COOL	for normal	cooling
MAX	COOL	for maximum	cooling
FAN	ONLY	for circulating	room air
		when no cooling is desired

3.Turn the Thermostat Control to number 4 (mid-setting). You can adjust the air condi- tioner’s cooling performance by resetting the Thermostat Control to a higher number for maximum cooling. Lower the number setting for less cooling. You will need to experiment to find the setting which suits you best.

NOTE: If you turn your air conditioner off, wait at least 3 minutes before turning it back on or you may blow a fuse or trip a circuit breaker.

The exhaust vent control

The Exhaust Vent Control setting draws stale or smoky air from the room.

1. To exhaust room air:

Set Exhaust Vent Control to OPEN. For cooling, set Fan Speed Control to one of the COOL settings. If no cooling is desired, use FAN ONLY setting.

2. To circulate room air:

Set Exhaust Vent Control to CLOSED. For cooling, set Fan Speed Control to one of the COOL settings. If no cooling is desired, use FAN ONLY setting.

NOTE: For maximum performance, the Exhaust Vent Control must be in the CLOSED position when cooling or room air circulation is desired.

3