Operating Your Air Conditioner
To obtain the best possible results from your air conditioner, it is important that you operate it properly. This section tells you how to set the controls and how to direct the cooled air.
Starting your air conditioner
1.Set Exhaust Control to CLOSED for maximum cooling performance. (See “Using the exhaust vent control” on
paw 6.1
2.Set the Fan Control to the desired setting. You can use either the ENERGY SAVER or NORMAL FAN settings. (See ‘Using the energy saver settings” on
paw 6.1
LOW
QUICK COMFORT-for fastest coding
FAN ONLY
3.Turn the Thermostat Controi to a mid setting. You can adjust the air condi- tioner’s cooling performance by turning the Thermostat Control clc&wise for more cooling or counterclockwise for less cooling. You will need to experiment to find the setting which suits you best.
IMPORTANT: lf you turn the air conditioner off, or if the compressor tums off when you lower the Thermostat Control, wait at feast 3 minutes before turning the air conditioner back on. If you don’t waft, you may blow a fuse or trip a circuit breaker.
Electrical Shock Hazard
l Plug unit onfy into grounded electrical outlet.
*Do not uw an extension cord.
l Do not operate unit with the front panel removed.
Failure to follow the above precautions couki result in electrical shock or per- sonal injury.
5
