Using the exhaust vent control
The Exhaust Vent Control draws stale or smoky air from the room or circulates existing room air.
To exhaust room air:
1.Set Exhaust Vent Control to OPEN.
2.Set Fan Control to desired setting (ENERGY SAVER or NORMAL FAN). If no coding is desired, set Fan Control to
FAN ONLY.
3.Set Thermostat Control to desired setting.
To circulate room air:
1.Set Exhaust Vent Control to CLOSED.
2.Set Fan Control to desired setting (ENERGY SAVER or NORMAL FAN). If no coding is desired, set Fan Control to
FAN ONLY.
3.Set Thermostat Control to desired setting.
NOTE: For maximum performance, the Exhaust Vent Control must be in the CLOSED position when cooling or room air circulation is desired.
Using the energy saver settings
Use the ENERGY SAVER settings when you do not want the fan to run continuously. Using these settings causes the fan to stop when the compressor stops and saves energy.
Set the Fan Control to the desired setting.
MED
QUICK COMFORT
Changing air direction
The air direction cartridges on both sides of the unit control the direction of the cooled air. The air direction cartridge rotates to direct the air straight ahead or to the sides of the unit. The buyers in each air direction cartridge are operated by a tab. Use the tab to direct the air up, down, or straight ahead.
6
