Whirlpool CA13WQ4 OperatingInstructions, Startingyour air conditioner, Changingair direction

OperatingInstructions

Startingyour air conditioner

Electrlcal Shock Hazard

l

l

l

Plug unit only Into grounded eiectrkal outlet.

Do not use an extenslon cord.

Do not operate unlt with front removed.

Failure to follow the above precautions could resutt In electrical shock or personal injury.

1. Sat Alr Control to OFF for maximum cooling.

Air cmml

2. Set System Control to the desired setting.

LO COOL	...........for sleeping	comfort
MED COOL .._	for normal	cooling
HI COOL	..._..__for. maximum	cooling
FAN ONLY	...... for circulating	rwm air
	when no cooling is desired

3. Turn the Thermostat Control to number 6 (mid-setting). You can adjust the air conditioner’s cooling performance by resetting the Thermostat Control to a higher number for maximum cooling. Lower the number setting for less cooling. You will need to experiment to find the setting which suits you best.

NOTE: if you turn your air conditioner off or if the compressor turns off when lowering the Thermo- stat Control, wait at least three (3) minutes before turning it back on or you may blow a fuse or trip a circuit breaker.

Changingair direction

The louvers in the grille area at the top of the air conditioner control the directions of the condi- tioned air.

l Move tabs at bottom of the grille in the direction YOU want the air to go (right, iett or straight ahead).

l Move tab in the center louver to direct air up or down.

3