Whirlpool CAH12W04 OperatingInstructions, Startingyour air conditioner, Usingthe HEATsettings

OperatingInstructions

Startingyour air conditioner

Exhaust vent

cwtrd -

Thermostat

amtrd -

Electrlcal Shock Hazard

l Plug unit only Into grounded electrlcal outlet.

l Do not use an extenslon cord.

l Do not operate unlt with front removed.

Failure to follow the above precautions could resuit In elect&al shock or personal Injury.

1.Set Exhaust Vent Control to CLOSED for maximum cooling.

2.Set System Control to the desired setting. LO COOL .........................for sleeping comfort

HI COOL ......................... for maximum cooling FAN ONLY ................... for circulating room air when no cooling is desired

3.Turn the Thermostat Control to number 6 (mid-setting). You can adjust the air condi- tioner’s cooling performance by resetting the Thermostat Control to a higher number for maximum cooling. Lower the number setting for less cooling. You will need to experiment to find the setting which suits you best.

NOTE: If you turn your air conditioner off or if the compressor turns off when lowering the Thermo- stat Control, waft at least three minutes before turning it back on or you may blow a fuse or trip a circuit breaker.

Usingthe HEATsettings

Turn the Thermostat Control to number 6 (mid- setting). You can adjust the air conditioner’s heating performance by resetting the Thermostat Control to a lower number for more heat. Turn to a higher number for less heat.

LO HEAT-for reduced air movement with heat HI HEAT-for maximum air movement with heat

NOTE: This product is not designed to be used as a primary heat source. lt is intended for supplemental heating only.

3