Cycle Control Knob
Selecting a cycle
HEAVY WASH Cycle
A double wash for normal to heavily soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 60 minutes.
ENERGY SAVING
WASH Cycle
A light to normal, everyday soiled loads. Uses less water and energy than HEAVY WASH Cycle. Cycle time is about 55 minutes.
RINSE & HOLD Cycle...
For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the dishwasher is heated during the “dry” part or the cycle.
If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps
To add a dish after starting
1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed ENERGY SAVING WASH.
2.Unlatch the doorto stop the cycle.
3.Open the door and add the dish.
save energy, but dishes ta ke longer to dry (over- night) and some water spotting may result. Some items (such as plastics) may need towel drying.
Keep the door closed to allow the Cycle Con- trol Knob to complete its cycle.
4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when
5.Latch the door. The dishwasher will start from where it stopped.
