Adding detergent, Rinse aid dispenser

Adding detergent

The kind and amount of dishwasher detergent you use is an important part of getting your dishes clean. Read this section carefully.

Use automatic dlsh- washer detergent only.

Other detergents are too mild and much too sudsy to work in the dishwasher.

Different brands of

dishwasher detergent have different amounts of phosphorus. Phospho- rus softens water and

helps prevent water spots on dishes.

If water is hard and

phosphorus content is low (8.7% or less], you may need to use more

detergent or use a

brand with a higher

phosphorus content (12% or higher).

Do not add detergent until you are ready to wash. Fresh, dry deter-

gent Is necessary for

best washlng results. Store detergent tightly in a cool, dry place.

The detergent dispenser has one section with a cover and one without.

l Put detergent in both sections for Cycles with two washes.

l Put detergent in the covered section Only for cycles with one wash.

The amount of detergent to use depends on the hardness of your water. If too little is used, dishes won’t be clean. However, if too much is

used in soft water, glassware will , beginto etch.

Find out your water’s hardness by asking your local water depart-

ment, water softener company or county extension agent.

HARD -Fill 1 or both sections to top 8 or more grains of

or both sections to

middle line if water is 5 to 7 grains Of

SOFT - Fill one or both sections to bottom line if water is 0 to 4 grains of hardness.

A rinse aid helps keep water from forming droplets and dry- ing as spots. Keep the dispenser filled with a rinse aid such as

Jet-Dry.” A small amount is released automatically during the

final rinse1 of each cycle. Check the dispenser periodically to see if it needs refilling.

Keep the dispenser fill cap tightly closed.