Whirlpool DU9900XR manual

When the HI-TEMP WASH- ING option is selected, water for the main wash and the final rinse is heated to 145 F (63 C] - except in RINSE HOLD

Washing and rinsing ac- tion in parts of the cycle will be longer if the water is

heated.The HOLD-HEAT WATER Signal Light will be on while water is heating.

Touch once to select the option. Touch again if you want to cancel it.

The Signal Light on the selectorwill be on if HI- TEMP WASHING is selected.

The Signal Light will be off if the option is not selected or if it can’t be used with the cycle selected; RINSE HOLD.

You can select or cancel the option during a cycle by touching the pad.

The HI-TEMP WASHING Option is not recom- mended in the CHINA CRYSTAL Cycle

When the HEAT DRY Selector is touched, air in the dishwasher is heated during the “dry” part of any

cycle-except RINSE HOLD. If the signal light above the Dry Option Selector is ON, you will get HEAT DRY. If the signal light is OFF, you

will get AIR DRY.

The AIR DRY Option helps save enerav, but dishes will

take longerto dry (overnight)<nd some water spotting may result. Some items (such as plas- tics) may need towel drying. For best results, use a liquid rinse aid such as Jet-Dry.” You can select or cancel the option during

a cycle by touching the option selector.

Use the DELAY WASH Op- tion when you want the se- lected cycle to start later - from 1 to 9 hours after load- ing the dishwasher, For ex- ample, use DELAY WASH to run the dishwasher during off-peak hours of electrical use.

1.Load the dishwasher; close and latch the door.

2.Select cycle and option or options desired.

3.Touch the START DELAY WASH Selector once for each hour you want the dishwasher to delay.

4.Do not touch START.The selected cycle will

start automatically after the time in the Dis-

play has elapsed.

l You may touch START at any time during the

delay if you want the dishwasher to start immediately.

l Add time during the delay by touching the

selector once for every additional hour of delay you want.

l Add items to the load at any time during the delay. Close and latch the door.

Touch the DRAIN OFF

Selector once to stop a cycle. The dishwasher will stop and the water will pump out. This takes about

2 minutes -the Display will show “02:

When the draining stops, a new cycle can be selected. Check the de-

tergent dispenser before starting another cycle.

Touch the selector twice to cancel DELAY WASH if you want to cancel delay hours but not start the machine immediately.

If you cancel instructions during a cycle,the dishwasher will stop, but water will not drain away. Do not allow water to stand in the dishwasher.

9