Removing the crispers and crisper cover
To remove the crispers:
1.Slide crisper straight out to the stop.
2.Lift the front and slide out the rest of the way.
3.Replace in reverse order.
Pull out to the stop, lift the front, and pull again.
To remove the cover:
1.Push up the glass insert from the bottom, then slide out with both hands.
2.Lift front of cover frame.
3.Lift cover frame up and out.
To replace the cover:
1.Fit back of cover frame into notch supports on back wall of refrigerator, then lower the front into place.
2.Make sure the front cover metal support is in the notches in the sides of the liner.
NOTE: If the support is not positioned properly, the doors may not close all the way.
3.Slide back of glass insert into place, then lower front.
Remove the glass insert. Lift the cover front, then the back.
NOTE: Glass insert is heavy. Handle it carefully.
Adjusting the crisper humidity
You can control the amount of humidity in the moisture- sealed crispers. Adjust the control to any setting between LOW and HIGH.
lLOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
lHIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
control
Humidity Control
HICne*.a.LOW
Removing the freezer baskets
Remove the freezer baskets for easier cleaning.
To remove the baskets:
1.Slide basket out to the stop.
2.Lift basket front slightly.
3.Slide basket out the rest of the way.
To replace the baskets:
1.Place basket on slides in liner wall.
2.Make sure the wire stops on basket clear the front of the slides.
3.Slide basket in all of the way.
10
