83. Remove the metal junction box and save the
2 mounting screws.
a. Bend back ears of 3 wire plug on ice maker wiring assembly.
b. With the green wire up, snap the plug into hole in side of junction box.
c. Connect the 3 wire plug into mating part in junction box. Remount metal junction box.
JUNCTIONBOXAND CABINET.
84. Place split grommet (#939033) around wiring assembly and push into cabinet hole. Seal space between wiring and grommet with per- magum sealant.
B5. Route white and tan wires behind con- denser to unit compartment. Remove screw from cabinet. Place clamp (#939009) around both wires and attach to cabinet with the screw just removed. Hold wires away from screw when tightening.
WHITE AND TAN
WIRES