Whirlpool ED20GK, ED20HK manual Using Your Refrigerator, Exterior moisture control

Using Your Refrigerator

Continued

Model EDSOGK: Glass shelves are heavy. Be careful.

Exterior moisture control

The Exterior Moisture Control on the Control Console operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the OFF setting when humidity is low.

2.Use the ON setting if moisture forms on the outside of the refrigerator.

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove glass or wire shelves:

1.Remove items from shelf.

2.Tilt up at front.

3.Lift up at back.

4.Pull shelf straight out.

To replace glass or wire shelves:

1.Guide the rear hooks into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Removing and adjusting the freezer shelves

To remove the shelves:

1.Lift right side of shelf off supports.

2.Slide shelf out of shelf support holes.

3.Replace in reverse order.

To adjust the shelves:

1.Remove shelf as above.

2.Remove supports by sliding upward.

3.Replace supports on desired level.

4.Replace shelf.

NOTE: The cup shaped supports go in the back of the freezer.