Whirlpool ED22DF warranty Changing the control, settings

3.Give the refrigerator time to cool down completely before adding food. This may take several hours.

The settings indicated above should be correct for normal, household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. If you need to adjust these settings, see “Changing the control settings” below.

NOTE: The Automatic Exterior Moisture control continuously guards against moisture build-up on the outside of your refrigerator cabinet. This control does not have to be set or adjusted.

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number, 1-800-253-l 301.

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:		REASON:
Refrigerator		l	Door	opened				often
section		l	Large	amount				of food added
too	warm	l	Room temperature						too warm
Freezer		l	Door	opened				often
section		l	Large	amount				of food added
too	warm	l	Very	cold		room temperature
			(can’t	cycle			often		enough)
Refrigerator		l	Controls			not	set correctly
section			for your		conditions
too	cold
Ice	not	l	Heavy		ice usage
made fast		l	Very	cold		room temperature
enough			(can’t	cycle			often		enough)
Both		l	Door	opened				often
sections		l	Large	amount				of food added
too	warm	l	Very warm or very cold room

temperatures

RECOMMENDED

CONTROL SETTINGS:

Refrigerator 4

FreezerA

Refrigerator 3

FreezerC

Refrigerator 2

Freezer6

Refrigerator 3

FreezerC

Refrigerator 4

FreezerB

8