Whirlpool ED22DW Using your refrigerator, Setting the controls, Changing the control settings

Models: ED22DW

1 20
Download 20 pages 49.1 Kb
Page 5
Image 5

Using your refrigerator

FREEZER CONTROL

REFRIGERATOR CONTROL

EXTERIOR MOISTURE CONTROL

LIGHT SWITCH

Setting the controls...

Controls forthe refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time...

1.Set the REFRIGERA- TORCONTROL to 3.

2.Set the FREEZER CONTROL to B.

Changing the control settings...

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.

CONDITION: REASON:

Give the refrigerator time to cool down com- pletely before adding food. (This may take sev- eral hours.]

These settings should be about right for nor- mal household refrigerator usage.

The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

RECOMMENDED

CONTROL SETTINGS:

If Refrigerator

Section is

TOO WARM

If Freezer Section is

TOO WARM

QUESTIONS?

Door opened often

Large amount of food added Room temperature too warm

Door opened often

Large amount of food added Very cold room temperature (can’t cycle often enough)

Refrigerator4

FreezerA

Refrigerator

Freezer:

call

Your

if Refrigerator

Controls

not set correctly

COOL-LINE@ Section is

for your

conditions

service

TOO COLD

 

 

 

assistance

If ICE isn’t

Heavy ice

usage

telephone

MADE FASTENOUGH

Very cold

room temperature

number

 

(can’t cycle often enough]

(Page

18).

 

 

 

 

 

Refrigerator2

FreezerB

Refrigerator3

FreezerC

If BOTHSECTIONS

Door opened

often

are TOO WARM

Large amount

of food added

 

Very warm or very cold

 

room temperatures

Refrigerator4

FreezerB

Exterior Moisture Control

The Exterior Moisture Control on the Control COnSOle operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

I. Use the “OFF”setting when humidity is low.

2.Use the “ON”setting if moisture forms on the out- side of the refrigerator.

5

Page 5
Image 5
Whirlpool ED22DW Using your refrigerator, Setting the controls, Changing the control settings, Exterior Moisture Control