Adjusting the crisper humidity con
You can control the amount of humidity in the
1.The control can be adjusted to any setting between LOW and HIGH.
2.LOW (open) lets moist air out of crisper for best storage of fruits and vegetables with skins.
3.HIGH (closed] keeps moist air in the crisper for best storage of fresh leafy vegetables.
Adjusting meat drawer temperature...
USE CONTROL TO ADJUST
MEAT DRAWER TEMPERATURE
Cold air flows against the meat drawer through an opening between the freezer and the refrigera- tor. This helps keep the meat drawer colder than the rest of the refrigerator.
Slide the control to let more or less cold air through.
SPILLGUARDshelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
1.Remove items from shelf.
2.Slide shelf out with an even, constant pull to the stop.
3.Lift front and slide the rest of the way out.
To move shelf guides to new posltlon:
1.Lift front of guide. Pull guide forward off rear support. Repeat for other guide.
2.To replace guide, push guide onto rear support. Push front of guide down onto support.
To replace glass shelves:
1.Guide rear of shelf into shelf guide.
2.Slide shelf into place.
Removing the crispers, meat drawe!r and covers.. .
To remove the crispers and meat drawer:
1.Slide crispers and meat drawer straight out to the stop. Lift the front, then slide the rest of the way out.
2.Replace in reverse order.
To remove the covers:
1.Lift front of cover off supports.
2.Lift out cover by pulling up and out.
To replace the covers:
PULL OUT TO THE Sl r0
LIFT THE FRONT AND PULL AGAIN.
l Fit back of cover in notch supports on walls of refrigerator, then lower into place.
NOTE: Glass cover will fit only above full wldth crisper.
LIFT THE COVER FRONT,
THEN THE BACK.
6
