Whirlpool ED22EM manual Removing the crispec, meat pan and covers, Removing the base grille

Removing the crispec, meat pan and covers...

To remove lhe crisper and meat pan:

1. Slide crisper and meat pan straight out to
2.	Lift the front.	Ca
3.	Slide the rest of the way out.

4. Replace in reverse order.

To remove the oovers:

l Covers are held in place by two pegs at tt and two notched tabs in front.

I. Press front tabs out of the way.

2.Lift cover front.

3.Lift back off the pegs.

4.Replace in reverse order

Changing the light bulbs.. l

WARNING: Before removing a light shield for cleaning or for replacing the bulb, either unplug retrigerator or discon-

nect electrlcitv leading to re- frigerator at the main power supply. Shock and Injury can occur it elec- triclty remains connected.

light bulbs behind retrlgemtor and treezer con- trol consoles:

1.Pull control knob straight off.

2.Pull bottom of control panel straight out.

3.Lift top of panel off supports.

4.Replace with a 40-watt appliance bulb.

5.Replace panel in reverse order.

Light bulb behind ice maker:

1.Remove the ice bin (see ice maker instructions page 9).

2.Replace with a 40-watt appliance bulb.

3 Replace ice bin.

Dispenser light:

1.Reach the bulb through the dispenser area

2.Replace with a heavy-duty IO-watt bulb.

Pull Off the Dial;

Pull Out at the Bottom

Removing the base grille...

Support Tabs

To replace:

1. Line UD arille support tabs with metal clips.

2. Pull grille outwards as shown2. Push firm& to snap into place

3. Do not remove Tech sheet fastened behind grille 3. Close the doors.