Whirlpool ED20ZK, ED22ZR, ED20PK warranty Removing the freezer bin, Using the ice cube trays

Removing the freezer bin

For proper air movement, keep the freezer bin in place when the refrigerator is operating.

To remove the bin:

1.Slide bin out to the stop.

2.Lift bin at the front to clear the stop.

3.Slide bin out the rest of the way.

To replace the bin:

1.Place bin on the slides.

2.Make sure the stops clear the front of the slides.

3.Slide bin in.

Using the ice cube trays

If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.

To remove ice:

1.Hold tray at both ends.

2.Twist slightly.

Using the automatic ice maker

(Factory-installed on ED22ZR, optional on EDZOPK and EDZOZK)

If you have the automatic ice maker accessory (Part No. ECKMF80), or if you plan to add one later, there are a few things you will want to know:

l The ON/OFF lever is a wire signal arm.

Down ... to make ice automatically. up . .. to shut off the ice maker.

NOTE: Do

connected to the water suDDlv.lostructlons for water supply hook up are at -

tached to the back of the refriaeratoc cabinet.

lThe dial or lever on the side of the ice maker changes the size of the cubes.

l Shake the bin occasionally to keep cubes separated and to obtain increased storage capacity.

lIt is normal for ice crescents to be attached by a corner. They will break apart easily.

l You will hear water running when ice maker is working. You’ll hear ice fall into the bin. Don’t let these sounds bother you.

Raise signal arm to stop ice maker.

Lower signal arm to 8tart ice maker.

11