Raise signal arm to stop ice.
Lower signal arm to start it.
Automatic ice maker
Here are a few things you will want to know about your automatic ice maker:
l The ON/OFF lever is a wire signal arm. Down.. .for making ice automatically. Up...to shut off the ice maker.
NOTE: Do not turn ice maker on until it is con-
nected to the water supply. Instructions for ice maker water supply
lIt is normal for ice crescents to be attached by a corner. They will break apart easily.
l The ice maker will not operate until the freezer is cold enough to make ice. This can take overnight.
lIf ice is not being made fast enough and more ice is needed, turn the Refrigerator Control toward a higher number. Wait a day and, if necessary, turn the Freezer Control toward C.
l Good water quality is important for good ice quality. It is not recommended that the ice maker be connected to a softened water supply. Water softener chemicals such as salt from a malfunc- tioning softener can damage the ice maker mold and lead to poor quality ice. If a softened water supply cannot be avoided, then it is important that the water softener be well maintained and operating properly.
Removing ice maker storage bin
Remove, empty and clean the storage bin:
lIf the ice dispenser has not, or will not, be used for a week or more;
lIf a power failure causes ice in the bin to melt and freeze together;
l If the ice dispenser is not used regularly.
1.Pull the covering panel out from the bottom and slide it to the rear.
11
