Whirlpool ED25PW manual UsingYourRefrigerator

UsingYourRefrigerator

Setting the controls

Controls for the refrigerator and freezer are in the refrigerator. To adjust a control, reach under the console and turn the knob. When the refrigerator is plugged in for the first time:

1. Set the Refrigerator Control to 3.

2. Set the Freezer Control to B.

Give the refrigerator time to cool down completely before adding food. (This may take several hours.) These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.

Refrigerator Control adjustments range from 1 to 5. Freezer Control adjustments range from AtoC.

Changing the control settings

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below. If you have questions, call your COOL-LINE@ serv- ice assistance number. (See page 18 .)

l Adjust the Refngerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

							RECOMMENDED
CONDITION:		REASON:					CONTROL	SETTINGS:
If Refrigerator		Door	opened		often		Refrigerator	4
Section	is	Large	amount		of food added		Freezer	A
TOO WARM		Room temoerature				too warm
If Freezer		Door	opened		often		Refrigerator	3
Section	is	Large	amount		of food added		Freezer	C
TOO WARM		Very cold room temperature
		(can’t	cycle often			enough)
If Refrigerator		Controls		not set correctly			Refrigerator	2
Section	is	for your		conditions			Freezer	B
TOO COLD
If ICE isn’t		Heavy	ice usage				Refrigerator	3
MADE	FAST ENOUGH	Very cold room temperature					Freezer	C
		(can’t	cycle often			enough)
If BOTH	SECTIONS	Door	opened		often		Refrigerator	4
are TOO WARM		Large	amount		of food added		Freezer	B

Very warm or very cold room temperatures