PART
Door liners and gaskets
Plastic parts
(covers and panels)
Defrost pan
Condenser coils
Floor under refrigerator
WHAT TO USE
Sponge, soft cloth or paper towel with mild detergent and warm water
Soft, clean sponge or soft, clean cloth with mild detergent
and warm water
Sponge or cloth with mild detergent and warm water
Vacuum cleaner with extended narrow attachment
Floor cleaners
HOW TO CLEAN | 1 |
l Wash, rinse and dry thoroughly.
DO NO USE cleaning waxes, concen- trated CTetergents, bleaches or cleaners contalnlng petroleum on plastic parts.
l Wash, rinse and dry thoroughly.
DO NOT USE Paper towels, window spra s s ourlng cleansers or flam- mqb L ku t s. These can scratch or damage material. See “Important Safety Instructtons” on page 3.
l Remove base grille. (See page 17.)
l To remove defrost pan, lift pan over wire brace (remove tape; if any).
l Wash, rinse and dry thoroughly.
l Replace with notched corner to the rear. Push it in all the way.
l Make sure defrost pan drain tube is pointing into pan.
l Replace base grille.
l Remove base grille.
l Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month.
l Replace base grille.
l Roll refrigerator out only as far as the water supply line allows.
l Clean floor.
l Roll refrigerator back into place.
l Check to see if the refrigerator is level.
21
