The water dispenser

Chilled water comes from a tank behind the meat drawer. It holds approximately 1% quarts (1.5 L).

When the refrigerator is first hooked up, press the water dispenser bar with a glass or jar until you have drawn and discarded 2 or 3 quarts (1.9 to 2.8 L). The water you draw and discard will rinse the tank and pipes.

Allow several hours to chill a new tankful.

NOTE: The small tray beneath the dispenser is designed to evaporate small spills. There is no drain in this tray. Do not pour water into it.

To dispense water:

1.Press a sturdy glass against the water dispenser bar.

2.Remove the glass to stop dispensing.

NOTE: Dispense enough water every week to maintain a fresh supply.

The dispenser

light

WATER

LIGHT

To turn on night light, slide dispenser LIGHT switch to the left. See page 17 for directions for changing the dispenser light bulb.

Using the automatic ice maker

Here are a few things you will want to know about your automatic ice maker:

l The ON/OFF lever is a wire signal arm.

Down ... to make ice automatically.

up ... to shut off the ice maker.

. . .

NOTE: Do not Urn ice maker on untrl tt IS Connected to the waterruc-

for Ice water

supply hoob

lIt is normal for ice crescents to be attached by a corner. They will break apart easily.

l The ice maker will not operate until the freezer is cold enough to make ice. This can take overnight.

l If ice is not being made fast enough and more ice is needed, turn the Refrigerator Control toward a higher number. Wait a day and, if necessary, turn the Freezer Control toward C.

Raise signal arm to stop ice maker.

Lower signal arm to start ice maker.

14

Page 14
Image 14
Whirlpool ED25YQ warranty Using the automatic ice maker, Water dispenser, Dispenser Light, To dispense water, For Ice water