GENERAL OPERATION

Possible Causes and/or Recommended Solutions

Temperature is too warm

■ New installation - Following installation, allow 24 hours for the refrigerator and freezer to cool

 

completely.

 

NOTE: Adjusting the temperature control(s) to the coldest setting will not cool either

 

compartment (refrigerator or freezer) more quickly.

 

■ Doors are opened often or not closed completely - This allows warm air to enter the

 

refrigerator. Minimize door openings, keep the doors fully closed, and make sure both doors are

 

properly sealed.

 

■ Air vents are blocked - Remove items that are immediately in front of the vents.

 

■ Large amount of warm food recently added - Allow several hours for the refrigerator to return

 

to its normal temperature.

 

■ Controls are not set correctly for the surrounding conditions - Adjust the controls to a colder

 

setting. Check the temperature again in 24 hours.

 

 

Temperature is too cold

■ Controls are not set correctly for the surrounding conditions - Adjust the controls to a

 

warmer setting. Check the temperature again in 24 hours.

 

■ Top refrigerator shelf is colder than lower shelves - On some models, air from the freezer

 

enters the refrigerator compartment through vents near the top refrigerator shelf. As a result, the

 

top shelf can be slightly colder than lower shelves.

 

■ Air vents are blocked - Remove items that are immediately in front of the vents.

 

 

Interior moisture buildup

NOTE: Some moisture buildup is normal. Clean with a soft dry cloth.

 

■ Room is humid - A humid environment contributes to moisture buildup. Only use the refrigerator

 

in an indoor location, with as little humidity as possible.

 

■ Doors are opened often or not closed completely - This allows humid air to enter the

 

refrigerator. Minimize door openings, keep the doors fully closed, and make sure both doors are

 

properly sealed.

 

 

Interior lights do not work

■ Doors have been open for an extended period of time - Close the doors to reset the lights.

 

■ Light bulb is loose in the socket or has burned out - On models with incandescent interior

 

light bulbs, tighten or replace the bulb. See “Lights.”

 

NOTE: On models with LED lights, call for assistance or service if the interior lights do not illuminate

 

when either door is opened. See either the front cover or the Warranty for contact information.

 

 

Dispenser lights

■ Dispenser light is turned off - On some models, if the dispenser light is set to OFF, the light will

do not work

turn on only when a dispenser pad/lever is pressed. If you want the dispenser light to stay on

(on some models)

continuously, select a different setting. See “Water and Ice Dispensers.”

 

■ Dispenser light is set to AUTO or NIGHT LIGHT - On some models, if the dispenser light is set

 

to AUTO or NIGHT LIGHT, make sure the dispenser light sensor is not blocked. See “Water and

 

Ice Dispensers.”

 

NOTE: On models with LED lights, call for assistance or service if the dispenser lights do not operate

 

correctly. See either the front cover or the Warranty for contact information.

 

 

16

Page 15 Page 17
Page 16
Image 16
Whirlpool ED2KVEXVB Temperature is too warm, Interior moisture buildup, Dispenser lights, Do not work, On some models
Page 15 Page 17

WRS322FDAM, WRS325FDAW, WRS325FDAM, ED2KVEXVB specifications

Whirlpool has established a strong reputation in the home appliance market, particularly known for its innovative and reliable refrigerators. This article explores a selection of Whirlpool refrigerator models: ED2KVEXVB, WRS325FDAM, WRS325FDAW, and WRS322FDAM, highlighting their main features, technologies, and characteristics.

The Whirlpool ED2KVEXVB is a top freezer refrigerator that combines classic design with modern functionality. One of its standout features is the Adaptive Defrost system, which optimizes the defrost process based on the usage patterns of the refrigerator. This not only helps in maintaining an even temperature but also improves energy efficiency. The ED2KVEXVB also offers a convenient spill-proof glass shelf design, which helps contain spills and prevents the mess from spreading to other areas.

Moving on to the WRS325FDAM and WRS325FDAW, these side-by-side models bring convenience and organization to your kitchen. Both models feature a sleek finish and an external water and ice dispenser, allowing you to access refreshing drinks at the touch of a button. The Accu-Chill temperature management system ensures that foods stay fresh longer by adapting the cooling based on the conditions in the refrigerator. Additionally, these models come with humidity-controlled crisper drawers that help to keep produce fresher.

The WRS322FDAM shares many of the features of the WRS325FDAM and WRS325FDAW, further emphasizing Whirlpool's commitment to consumer needs. This model also provides an exterior ice and water dispenser and incorporates the same Accu-Chill technology. Moreover, the additional IntelliSense technology monitors the internal temperature and makes adjustments accordingly, ensuring optimal working conditions.

All four models are designed with energy efficiency in mind, boasting Energy Star certification, which signifies lower energy consumption, ultimately leading to cost savings on utility bills. They also feature adjustable shelves, allowing users to customize the interior layout according to their needs.

In summary, Whirlpool's ED2KVEXVB, WRS325FDAM, WRS325FDAW, and WRS322FDAM models represent a range of features aimed at improving user experience. With efficient cooling technologies, customizable interior layouts, and energy-efficient designs, these refrigerators stand out in the crowded appliance market, delivering reliability and innovation for modern homes.
Top Page Image Contents