Door Alignment

A refrigerator that is not level from side-to-side may appear to have doors that are not properly aligned. If the doors appear this way, use the instructions in the previous section to check the leveling.

The doors are designed to be slightly different heights when the refrigerator is empty, in order to account for the weight of food that will be placed on the doors. If the doors are still not aligned after checking the leveling and loading the refrigerator with food, follow the steps below to adjust the door alignment.

1.Locate the alignment screw on the bottom hinge of the refrigerator door. See Graphic 9.

2.Use a ⁵⁄₁₆" wrench to turn the screw. To raise the refrigerator door, turn the screw to the right. To lower the door, turn the screw to the left.

3.Check that the doors are even at the top and bottom. If necessary, continue to turn the alignment screw until the doors are aligned.

4.Replace the base grille.

NOTE: Be sure to refasten the Tech Sheet behind the base grille.

Handle Installation and Removal

PARTS INCLUDED: Door handles (2), ¹⁄₈" hex key, spare setscrew(s)

To Install the Handles:

NOTE: The handle mounting setscrews are preinstalled in the handle.

1.Remove the handles, which are packed inside the refrigerator.

NOTE: To avoid scratching the finish, place the handles on a towel or other soft surface.

2.Open the freezer door. On the refrigerator door, place the handle on the shoulder screws with the setscrews facing the freezer.

A

B

A. Shoulder screws

B. Setscrews inside the handle

3.Firmly push the handle toward the door until the handle base is flush against the door.

4.While holding the handle, insert the short end of the hex key into the upper hole and slightly rotate the hex key until it is engaged in the setscrew.

5.Using a clockwise motion, tighten the setscrew until it begins to contact the shoulder screw.

6.Repeat steps 4 and 5 to begin fastening the lower setscrew.

7.Once both setscrews have been partially tightened as outlined in the previous steps, fully tighten both the upper and lower setscrews.

IMPORTANT: When the screws feel tight, tighten them an additional quarter-turn. The handle is not properly installed without this extra tightening.

8.Open the refrigerator door and close the freezer door. Repeat steps 2 through 7 to install the other handle onto the freezer door with the setscrews facing the refrigerator.

9.Save the hex key and all instructions.

To Remove the Handles:

1.While holding the handle, insert the short end of the hex key into the lower setscrew hole and slightly rotate the hex key until it is engaged in the setscrew.

2.Using a counterclockwise motion, loosen the setscrew a quarter-turn at a time.

3.Repeat steps 1 and 2 for the upper setscrew. Gently pull the handle away from the door.

4.If necessary, use a Phillips screwdriver to remove the shoulder screws from the door.

6

Page 5 Page 7
Page 6
Image 6
Whirlpool WRS325FDAW Handle Installation and Removal, Door Alignment, To Install the Handles, To Remove the Handles
Page 5 Page 7

WRS322FDAM, WRS325FDAW, WRS325FDAM, ED2KVEXVB specifications

Whirlpool has established a strong reputation in the home appliance market, particularly known for its innovative and reliable refrigerators. This article explores a selection of Whirlpool refrigerator models: ED2KVEXVB, WRS325FDAM, WRS325FDAW, and WRS322FDAM, highlighting their main features, technologies, and characteristics.

The Whirlpool ED2KVEXVB is a top freezer refrigerator that combines classic design with modern functionality. One of its standout features is the Adaptive Defrost system, which optimizes the defrost process based on the usage patterns of the refrigerator. This not only helps in maintaining an even temperature but also improves energy efficiency. The ED2KVEXVB also offers a convenient spill-proof glass shelf design, which helps contain spills and prevents the mess from spreading to other areas.

Moving on to the WRS325FDAM and WRS325FDAW, these side-by-side models bring convenience and organization to your kitchen. Both models feature a sleek finish and an external water and ice dispenser, allowing you to access refreshing drinks at the touch of a button. The Accu-Chill temperature management system ensures that foods stay fresh longer by adapting the cooling based on the conditions in the refrigerator. Additionally, these models come with humidity-controlled crisper drawers that help to keep produce fresher.

The WRS322FDAM shares many of the features of the WRS325FDAM and WRS325FDAW, further emphasizing Whirlpool's commitment to consumer needs. This model also provides an exterior ice and water dispenser and incorporates the same Accu-Chill technology. Moreover, the additional IntelliSense technology monitors the internal temperature and makes adjustments accordingly, ensuring optimal working conditions.

All four models are designed with energy efficiency in mind, boasting Energy Star certification, which signifies lower energy consumption, ultimately leading to cost savings on utility bills. They also feature adjustable shelves, allowing users to customize the interior layout according to their needs.

In summary, Whirlpool's ED2KVEXVB, WRS325FDAM, WRS325FDAW, and WRS322FDAM models represent a range of features aimed at improving user experience. With efficient cooling technologies, customizable interior layouts, and energy-efficient designs, these refrigerators stand out in the crowded appliance market, delivering reliability and innovation for modern homes.
Top Page Image Contents