The lights do not work

■Is a light bulb loose in the socket or burned out? See “Changing the Light Bulbs.”

■Is the dispenser light set to OFF? On some models, the dispenser light will operate only when a dispenser lever/pad is pressed. If you want the dispenser light to stay on continuously, set the dispenser light to ON, or (on some models) NIGHT LIGHT or AUTO or HALF or DIM. See “Water and Ice Dispensers.”

■Is the dispenser light set to NIGHT LIGHT or AUTO? On some models, if the dispenser is set to the NIGHT LIGHT or AUTO mode, be sure the dispenser light sensor is not blocked. See “Water and Ice Dispensers.”

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal. Clean with a dry cloth.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil. (This does not apply to models with the ice maker mounted at the top of the freezer door.)

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture-proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice clogged in the ice storage bin or delivery chute? Remove clogged ice, using a plastic utensil if necessary. Clean chute and bottom of storage bin using a warm moist cloth, and dry both thoroughly. To avoid clogging and maintain a fresh supply of ice, empty the storage bin and clean both the bin and delivery chute every two weeks.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

17

Page 16 Page 18
Page 17
Image 17
Whirlpool ED2KHAXVQ, ED2KVEXVQ, GSS26C4XXB, GSF26C4EXW Temperature and Moisture, Iceand Water, Temperature is too warm
Page 16 Page 18

WRS526SIAE, WRS526SIAH, W10297006C, GSF26C4EXB, GSF26C4EXW specifications

The Whirlpool ED2KVEXVQ, ED2KHAXVQ, GSS26C4XXB, GSF26C4EXW, and GSF26C4EXB refrigerator models are designed to elevate both functionality and style in any kitchen. These models showcase advanced technology and thoughtful design, focusing on user convenience and energy efficiency.

The ED2KVEXVQ and ED2KHAXVQ models emphasize spacious storage with a traditional top-freezer design, providing ample space to organize groceries. They come equipped with adjustable shelves, enabling users to customize their storage to accommodate different items easily. Both models feature Whirlpool's Adaptive Defrost technology, which optimizes the defrost cycle to enhance energy efficiency and maintain food freshness for longer periods.

On the other hand, the GSS26C4XXB and GSF26C4EXW models boast a side-by-side configuration, which provides quick access to both refrigerated and frozen items. This design is not only practical but also aesthetically pleasing. With features like humidity-controlled crispers, these refrigerators help in preserving fruits and vegetables by regulating moisture levels. Furthermore, the built-in ice maker offers the convenience of having ice on hand without the need for manual refills.

The GSF26C4EXB model stands out with its advanced water filtration system, ensuring that the water and ice dispensed are clean and taste-free. Convenience features such as exterior water and ice dispensers make it easy for users to access chilled beverages. Each model is designed with energy efficiency in mind, complying with Energy Star ratings, which signify that they consume less energy compared to standard options.

All these models incorporate noise-reducing technologies that help minimize operational sounds, allowing for a quieter kitchen environment. Moreover, these refrigerators are designed with sleek, modern finishes that enhance any kitchen décor while providing durable and reliable performance.

In summary, the Whirlpool ED2KVEXVQ, ED2KHAXVQ, GSS26C4XXB, GSF26C4EXW, and GSF26C4EXB refrigerators combine functionality, versatility, and modern design. They offer innovative features tailored for food preservation, energy efficiency, and user convenience, making them an ideal choice for any household seeking quality refrigeration solutions.
Top Page Image Contents