l Good water quality is important for good ice quality. It is not recommended that the ice maker be connected to a softened water supply. Water softener chemicals, such as salt from a malfunctioning softener, can damage the ice maker mold and lead to poor ice quality. If a softened water supply cannot be avoided, it is important that the water softener be well maintained and operating properlv.
Changing the light bulbs
I
Electrical Shock Hazard
Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading.to the refrigerator at the main power supply.
Failure to do so could result in electrical shock or personal injury.
To change the refrigerator light:
1.Disconnect refrigerator from power supply.
2.Reach behind the Control Console to remove bulb.
3.Replace with a
4.Reconnect refrigerator to power supply.
To change the crisper light:
1.Disconnect refrigerator from power supply.
2.Pull top of light shield forward until it snaps free.
3.Lower light shield to clear bottom supports.
4.Pull light shield out to remove.
5.Replace with a
6.Replace light shield in reverse order.
7.Reconnect refrigerator to power supply.
To change freezer light:
1.Disconnect refrigerator from power supply.
2.Push in sides of light shield until it snaps free.
3.Replace bulb with a
4.Replace the light shield.
5.Reconnect refrigerator to power supply.
NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace a bulb with one of the same size and shape.
13
