Using your refrigerator
Temperature Control
Run Swttch
.., |
|
Setting the control ... | ” |
The control for the refrigerator temperature IS rn the refrigerator When the refrigerator IS plugged tn and the run swrtch is moved to RUN
lSet the THERMOSTAT CONTROL to 3
Ltght Swttch
Give the refrigerator time to cool down com- pletely betore addlng food. (This may take sev-
era1 hours.)
This setting should be about right for normal household refrigerator usage.
The control will be set about right when milk or juice is as cold as you like. In hot weather or if the door is opened often, turn the control to a higher number to keep the temperature you like. If the milk or juice is too cold or refrigerator items start to freeze, turn the con- trol to a lower number or adjust the freezer tray damper. Wait 24 hours after an adjustment is made before further change is made to the controls.
The freezer tray..
The freezer tray is located under the freezer com- partment.
The damper at the rear of the freezer tray helps control the refrigerator temperature for warm weather operation. The damper can be adjusted for proper cooling and defrosting of the refrigerator,
lo adjust the damper:
I, Pull out the freezer tray.
2.Lift out the damper from the rear of the tray.
3.Slide damper into the desired position.
NOTE: “B,C, D” posltlons provlde tlne tooling adlustments to best meet your cooling needs In warm weather.
-
“A” position for normal cooling and defrosting.
E - (FULL Open]
