Refrigerator Doors: Removing,

Reversing (optional) and Replacing

TOOLS NEEDED: ⁵⁄₁₆ in. hex-head socket wrench, No. 2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆ in. open-end wrench, flat 2 in. putty knife.

IMPORTANT:

■Before you begin, turn the refrigerator control OFF, unplug refrigerator or disconnect power. Remove food and any adjustable door or utility bins from doors.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Door and Hinge Removal

⁵⁄₁₆ in. Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator (see Base Grille graphic).

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, continue with the “Door reversal (optional)” instructions. If you are not reversing the doors, see the “Door and Hinge Replacement” section.

Door Reversal (optional)

(See complete Graphics later in this section.)

Round-Head

Door Handle

Door Hinge

Handle Screw

Screw Hole Plug

Hole Plug

Cabinet

1.Remove ⁵⁄₁₆ in. hex-head hinge screws from handle side and move them to opposite side (see Graphic 1-1).

2.Remove cabinet hinge hole plugs from the cabinet top and move them to opposite side hinge holes as shown (see Graphic 1-2).

Doors

1.Remove door hinge hole plug from top of freezer door. Move to opposite side as shown (see Graphic 2).

2.Remove door stop from both the freezer and refrigerator doors and move to the other side (see Graphic 3).

Door and Hinge Replacement

NOTE: Graphic may be reversed if door swing is reversed.

1.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

2.Assemble the parts for the center hinge as shown and tighten all screws (see Center Hinge graphic). Replace the freezer door.

3.Assemble the parts for the top hinge as shown (see Top Hinge graphic). Do not tighten screws completely.

4.Line up the doors so that the bottom of the freezer door aligns evenly with the top of the refrigerator door. Tighten all screws.

Final Steps

1.Check all holes to make sure that hole plugs and screws are in place. Reinstall top hinge cover (see Top Hinge graphic).

2.Replace the base grille (see Base Grille graphic).

3.Plug in refrigerator or reconnect power.

4.Reset the control. See “Using the Control” section.

5.Return all removable door parts to doors and food to product.

6

Page 5 Page 7
Page 6
Image 6
Whirlpool ET0WSRXML00 manual Door and Hinge Removal, Door Reversal optional, Cabinet, Doors, Door and Hinge Replacement
Page 5 Page 7

ET0WSRXML00 specifications

The Whirlpool ET0WSRXML00 is an advanced top-freezer refrigerator that showcases modern features, elegant design, and user-friendly technologies. This appliance is engineered to provide efficient food storage and maintain optimal freshness, making it an essential addition to any kitchen.

One of the standout features of the ET0WSRXML00 is its spacious design. With a capacity of 18 cubic feet, it offers ample room for groceries, leftovers, and frozen items. The top freezer layout allows for easy access to frequently used items, while the refrigerator compartment is thoughtfully organized with adjustable shelves and door bins to accommodate different sizes of containers and food products.

The refrigerator incorporates advanced cooling technologies, including the Adaptive Defrost system. This feature monitors usage patterns and only runs the defrost cycle when necessary, resulting in improved energy efficiency and consistent performance. The Energy Star certification speaks to its eco-friendly design, helping to reduce energy costs while supporting sustainability initiatives.

In terms of food preservation, the ET0WSRXML00 utilizes a series of humidity-controlled crisper drawers. These drawers are designed to create the ideal environment for fruits and vegetables, helping to extend freshness and nutritional value. The temperature management system includes adjustable temperature controls, allowing users to customize settings based on their specific storage needs.

The Whirlpool ET0WSRXML00 is also designed with convenience in mind. The interior LED lighting illuminates the refrigerator’s contents, making it easy to find items even in low light conditions. The exterior features a sleek and contemporary finish that adds elegance to any kitchen decor. Additionally, the reversible door design ensures flexibility in installation, accommodating various kitchen layouts.

Maintenance is hassle-free with the ET0WSRXML00, thanks to its easy-to-clean surfaces and removable shelves. Users can easily rearrange the interior layout to suit changing storage requirements, ensuring maximum efficiency and organization.

Overall, the Whirlpool ET0WSRXML00 combines practicality with modern innovation, making it an excellent choice for anyone in search of a reliable and stylish refrigerator. With its balanced blend of features, technologies, and characteristics, it stands out in today’s competitive appliance market. Whether you are stocking up on groceries or simply looking to streamline your kitchen space, this refrigerator meets all expectations and more.
Top Page Image Contents