Whirlpool ET14AK Moving the meat pan and cover, Changing, light, Removing the freezer shelf, bulb

Moving the meat pan and cover...

The meat pan and cover can be removed for

cleaning and moved to another shelf, If desired Remove the meat pan frrst.

Removing:

I. Slide the pan out to stop

2.Lift the front of meat pan

3.Slide pan the rest of the way out

4.Tilt cover up at front

5.Pull forward and out

Replacing:

1 Fit notches underneath cover over rear and center cross bars on shelf

2 Lower cover In place.

3 Replace meat pan in reverse order

Changing	the	light	bulb...
WARNING: Before removing the light bulb, either
unplug		the refrigerator		or disconnect
the	electricity		leading	to	the re-
frigerutor		at the main		power	supply.	1. Reach		behind	control	console to	find bulb
Shock and injury can occur					if elec-	2.	Remove	bulb.
tricity remains			connected.			3	Replace	with	a 40-w&	appliance	bulb.

Removing crispers and crisper cover.. .

L1f1the Front. Then the Back

Removing Crispers:

1 Slide crisper straight out to stop.

2 Lrft the front

3. Slide the rest of the way out.

4. Replace in reverse order

Remove Cover:

1 Loft front, then lift back.

2 Pull up and out

Pull out to stop ronl and Pull Agaln

Replacing Cover:

1 Fit notches on back of cover into back nubs on wall of refrigerator

2 Lower front into place

Removing the freezer shelf.. . ,,

1	Loft front	slrghtl\
2	Lrft back	off scioports
3	Replace	rn reverse	order
		lift	the Front

Then the Back

Adjusting			the	refrigerator	shelves...
1	Frrs,	remove food from shelf
2	ShUe	shelf	straight	out to stop	Guide Stop

3Lift front

4Sllue the rest c ‘ the +KW out

Replacing	Shelf:
1 Fit bock	of shelf		on	top of	guides	wltn	wire stops
on the	bottom	of	auldes				-\Shelf	Guide
2 Lift front, slide		jheif		rn un?ll	It clears	guide	stops

6