Using your refrigerator
Power Saving Control
Setting the controls.. .
Controls for the refrigerator and freezer ore In the
refrrgerotor. When the refrigerator is plugged In for the first time
1 Set the REFRIGERA- TOR CONTROL to 3
2 Set the FREEZER
CONTROL tc B
Glve the refrigerator time to cool down com- pletely before adding food. (This may take sev-
eral hours,]
These settings should be about right for normal
household refrigerator usage.
The controls will be set about right when milk or juice IS as cold as you like and when ice cream 1sfirm
Changing the control settings.. .
If you need to adjust temperatures In refrigerator or freezer, use the settings listed In the chart below
l
l
l
Adjust | the Refrrgerator | Control | first. | ||
Wait | at least | 24 | hours | between | adjustments |
Then | adjust | the | Freezer | Control, | if needed. |
CONDITION:
If Refrigerator
Section IS
TOO WARM
If Freezer
Section IS
TOO WARM
QUESTIONS?
call your If Refngerata
service TOO COLD assistance
telephone If ICE Isn’t
REASONS:
Door opened often
Large amount of food odded
Room temperature too worm
Door opened often
Large amount of food added Very cold rcom temperature (can’t cycle often enough)
Controls not set correctly for your conditions
Heavy Ice usage
RECOMMENDED CONTROL SETTINGS:
Refrigerator4
FreezerC
Refrigerator3
FreezerA
Refrigerator2
Freezer0
Refrigerator3
number
MADE FAST ENOUGH
Very cold room temperature
FreezerA
(wge 11I
If BOTH SECTIONS ore TOO WARM
Door opened often
Large amount of food added Very worm 01 very cold room temperotures
Refrigerator4
FreezerB
Power Saving Control.. .
The Power Saving Control on the Control Con
sole operates electric heaters around the door
openings These heaters help keep moisture from forming on the outside of the refrigerator
4m
Use the ‘CONSUMES LESS ENERGY” setting <when humidrty IS low
2 Use the ‘REDUCES EXTERIOR MOISTURE” setting
only if moisture forms on the outside of the refrigerator
