Whirlpool ET14JMXBN00 warranty Changing the control settings, Removing the drop-indoor trim pieces

Models: ET14JMXBN00

1 25
Download 25 pages 8.58 Kb
Page 9
Image 9
Changing the control settings

Changing the control settings

If you need to adjust temperatures in refrigera- tor or freezer, use the settings listed in the chart below as a guide. If you have questions, call our Consumer Assistance Center number, 1-800-253-l 301.

l

l

l

Adjust the Refrigerator Control first. Wait at least 24 hours between adjust- ments.

Then adjust the Freezer Control if needed.

CONDITION:

Refrigerator section too warm

Freezer section too warm

Refrigerator section too cold

Ice not made fast enough

Both sections too warm

RECOMMENDED

REASON:CONTROL SETTINGS:

RefrigeratorFreezer

l Door opened often

l Large amount of food added l Room temperature too warm

l Door opened often

l Large amount of food added l Very cold room temperature (can’t cycle often enough)

l Controls not set correctly for your conditions

l Heavy ice usage

l Very cold room temperature

(can’t cycle often enough)

l Door opened often

l Large amount of food added

l Very warm or very cold room temperatures

Removing the drop-in door trim pieces

To remove the trim piece:

1.Remove all items from the shelf.

2.Pull straight up on the trim piece at each end.

I \

\

To replace the trim piece:

1.Locate each end of the trim piece above the trim pocket opening.

2.Push the trim piece straight down until it stops.

3. Replace items on the shelf.

9

 

Page 9
Image 9
Whirlpool ET14JMXBN00 warranty Changing the control settings, Removing the drop-indoor trim pieces