Adjusting the refrigerator shelves
The refrigerator shelves can be adjusted to match the way you use your refrigerator.
To remove the shelves:
1.Remove items from the shelf.
2.Slide shelf straight out to the stop.
3.Lift back of shelf over stop.
4.Slide shelf out the rest of the way.
To replace the shelves:
1.Slide back of shelf into shelf track in wall of cabinet.
2.Guide front of shelf into shelf track.
3.Slide shelf in all the way.
Removing the crisper(s)
To remove the crisper(s):
1.Slide crisper(s) straight out to the stop.
2.Lii the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the plastic cover:
1.Lift cover front and remove the cover support.
2.Lift cover up and slide out.
To replace the cover:
1.Fit cover tabs into lowest cabinet slots and push in. Lower the front retainers into place.
2.Insert cover support (with the long tab toward the front) into the groove on the underside of the cover.
NOTE: If the support needs adjustment, turn base clockwise to raise or counterclockwise to lower.
and cover
Models ET14JK, ET14UK and ET14JM
Lift cover fronf then the back.
Model ET14ZK
Lift cover fronS
then the back.
