Before Using Your
Refrigerator
In This Section
PawPage
Cleaning it ........................................................... 5 In8talling it properly ........................................ 5
Plugging it in ....................................................... 5 Leveling it ......................................................... 6
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to a power source, install it and level it.
Cleaning it
Clean your refrigerator before using it, if neces- sary. See cleaning instructions on page 13.
Plugging it in
Recommended Grounding Method
A 115 Volt AC, 60 Hz., 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit sewing only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.
See Electrical Requirements and Grounding Instructions Sheet in your Literature Package.
Installing it properly
1.Allow 3 inches (7.5 cm) between overhead cabinets and refrigerator top.
2.Allow at least 1 inch (2.5 cm) between the refrigerator condenser on the back and the wall.
3.Allow % inch (1.25 cm) on each side of the refrigerator for ease of installation.
4.If the hinge side of the refrigerator is to be against a wall, you might want to leave extra space so the door can be opened wider.
5.Level your refrigerator.
5
