Whirlpool ET16TK manual Changing the light bulb, Moving the meat pan and cover

Changing the light bulb...

Unplug the retrlgerator tlrst.

1.Reach behind control console to find bulb

2.Remove bulb.

3.Replace with a 40-w& appliance bulb.

Moving the meat pan and cover...

The meat pan and cover can be removed for cleaning and moved to another shelf, If desired. Remove the meat pan first.

Removing:

1.Slide the pan out to stop.

2.Lift the front of meat pan.

3.Slide pan the rest of the way out.

4.Tilt cover up at front.

5.Pull forward and out.

Replacing:

1.Fit notches underneath cover over rear and center cross bars on shelf.

2.Lower cover in place.

3.Replace meat pan in reverse order.

Adjusting the refrigerator

1 Ftrst, remove food from shelf.

2.Slide shelf straight out to stop.

3.Lift front.

4.Slide the rest of the way out

shelves...

Guide Star

Shelf Stop

Replacing	Shelf:
1. Fit back of shelf on top of guides with wire stops
on the bottom of guides.		Shelf Guide
2. Lift front,	slide shelf In until it clears gurde stops

,.8. ....~ .-

Removing crisp&s aid crisper cover.. .

Removing the Crispers: Lift the Front, Then the Back.

1.Slide crisper straight out to stop, lift front, then slide the rest of the way out.

2.Replace in the reverse order

Removing Cover:

1 Lift front and remove the cover support

2.Lift out cover by pulling up and out.

Replacing Cover:

1.Fit back of cover into notch supports on walls of refrigerator, then lower front into place.

2.Replace cover support with the long tab towards the front. Note: If support needs adjustment, turn base right to lower, or left to raise.

Pull out to stop. ront and Pull Again.

To remove shelf:

I,	Lift front	slightly.
2.	Lift back off supports.
3. Replace in reverse order.
To adjust		shelf:	Shelf Support

1.Remove shelf.

2.Remove supports by sliding upwards.

3.Replace supports on desired level.

4.Replace shelf.

6