Complete the Installation

 

Remove Doors and Hinges (all models)

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

IMPORTANT:

■All graphics referenced in the following instructions are included later in this section after “Final Steps.” The graphics shown are for a right-hand swing refrigerator (hinges factory installed on the right).

■If you only want to remove and replace the doors, see “Remove Doors and Hinges” and “Replace Doors and Hinges.”

■Depending on your model, you may have standard (Style 1) or contour (Style 2) doors. If you are going to reverse the door swing, follow the instructions for the appropriate door style.

■Before you begin, turn the refrigerator control OFF, and remove food and adjustable door or utility bins from doors.

⁵⁄₁₆'' Hex-Head Hinge Screw

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator. See Base Grille graphic.

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Reverse Doors–Standard Door (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Door Handle Screw Cover

Door Handle Seal Screw Front

Round-Head Handle Screw

Cabinet

1.Remove ⁵⁄₁₆" hex-head hinge screws from the handle side and move them to the opposite side. See Graphic 1-1.

2.Remove the cabinet hinge hole plugs from the cabinet top and move them to the opposite side hinge holes as shown in Graphic 1-2.

Freezer door

1.Remove freezer handle assembly as shown. Keep all parts together. See Graphic 2.

2.Remove the door stop. Move it to the opposite side of the freezer door as shown in Graphic 5.

3.Position the freezer handle on opposite side of freezer door. Assemble handles on the door as shown in Graphic 2.

4.Tighten all screws. Set aside the door until the hinges and refrigerator compartment door are in place.

5

Page 4 Page 6
Page 5
Image 5
Whirlpool ET1MHKXM Refrigerator Doors, Reverse Doors-Standard Door optional, Cabinet, Freezer door
Page 4 Page 6

ET1MHKXM specifications

The Whirlpool ET1MHKXM is a top-mounted refrigerator designed to blend functionality with style, making it a popular choice for modern kitchens. With its sleek design and efficient operation, it addresses the needs of families seeking reliable food storage solutions.

One of the standout features of the ET1MHKXM is its spacious interior, which allows for ample storage of groceries and other perishables. The refrigerator section offers adjustable shelves that provide flexibility to accommodate taller items. Additionally, the humidity-controlled crisper drawers ensure that fruits and vegetables maintain their freshness for an extended period. This is a key feature that many users appreciate, as it helps reduce food waste and keeps produce crisp.

Furthermore, the ET1MHKXM comes with the adaptive defrost feature which enhances energy efficiency. This technology monitors the frost buildup in the freezer and activates the defrost cycle only when necessary, thereby saving energy and ensuring optimal performance. The ENERGY STAR certification also reflects its energy-efficient design, making it a cost-effective appliance for consumers.

Another significant characteristic of the Whirlpool ET1MHKXM is its adjustable door bins, which provide convenience for storing a variety of condiments and small items. This feature allows users to customize the door space according to their preferences, facilitating easy access to frequently used items.

The sleek exterior is available in multiple finishes, allowing consumers to choose a look that best fits their kitchen décor. The exterior also features a fingerprint-resistant finish, making it easier to keep the surface clean and maintaining its aesthetic quality over time.

In terms of cooling technology, the refrigerator uses a reliable cooling system that maintains a consistent temperature throughout all compartments. This ensures that food remains at optimal temperatures, prolonging its shelf life.

Overall, the Whirlpool ET1MHKXM combines thoughtful design with practical technology, making it a reliable choice for those in need of a versatile and efficient refrigerator. Its combination of spacious storage, energy-saving features, and modern aesthetics makes it an excellent addition to any home.
Top Page Image Contents