Chapter 1 - Introduction and Description
Technical Specifications
The MT4X56USB conforms to the following specifications.
USB Ports
•Interface: USB Type A and Type B
•Speed: up to 12 Mbs
Modems
•Ports: 4
•Data Rates and Standards: 56 Kbps downloading from V.90/K56flex servers; V.90/K56flex, enhanced V.34, V.32bis, and V.22bis
•Error Correction: V.42
•Data Compression: MNP Class 5; V.42bis
•Fax Rate and Standards: 14.4 Kbps; V.17, Group 3, Class 1 and Class 2
Power
•External power supply, 110V AC or 240V AC,
Connectors
•Four
•One USB type B (upstream) connector
•One USB type A (downstream) connector
Operating System Requirements
•Processor and RAM: Pentium Class with minimum 16 MBS RAM recommended
•Operating System: Windows 95 (OSR2), Windows 98, Windows NT 4.0, and Windows 2000
Physical Description
•4.3” width by 1.1” height by 5.8” depth; 2.0 lbs
10.8cm width by 2.9 cm height by 14.8 cm depth; 0.9 kg
Environmental Requirements
•Ambient temperature: 32° F to 104° F (0° C to 40° C)
•Relative humidity: 0 to 95%
Preview of this Guide
This guide describes the MT4X56USB and explains how to install and configure the unit. The information contained in each chapter is as follows:
Chapter 1 - Introduction and Description
This chapter describes the MT4X56USB including features, technical specifications and a description of the front panel indicators and back panel connectors.
Chapter 2 - Installation
This chapter provides information on unpacking and cabling your MT4X56USB.
MT4X56USB | 7 |
